SEH ThinPrint, User Manual

Page: 34 / 130

Network Settings
TPR User Manual 34
Configuring SMTP
Proceed as follows:
1. Start the TPR Control Center.
2. Select
NETWORK - Email .
3. Configure the SMTP parameters; see: Table 7

34.
4. Click Save to confirm.

The settings are saved.
Table 7: SMTP Parameters
POP3 - Security Defines the authentication method to be used (APOP /
SSL/TLS).
When using SSL/TLS, the encryption strength is defined
via the encryption protocol and level

60.
POP3 - Check mail every Defines the time interval (in minutes) for retrieving emails
from the POP3 server.
POP3 - Ignore mail
exceeding Defines the maximum email size (in Kbyte) to be
accepted by the TPR.
(0 = unlimited)
POP3 - User name Defines the user name used by the TPR to log on to the
POP3 server.
POP3 - Password Defines the password used by the TPR to log on to the
POP3 server.
Parameters Description
SMTP - Server name Defines an SMTP server via the IP address or the host
name.
A host name can only be used if a DNS server was
configured beforehand.
SMTP - Server port Defines the port number used by the TPR to send emails
to the SMTP server. The port number 25 is preset.
Parameters Description