Sega AV F-ZERO AX, Owner'S Manual

Page: 34 / 252

− 27 −
2
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
Make sure that all of the adjusters are in contact with the floor. If they are
not, the cabinet can move and cause an accident.
This product has 6 casters and 4 Adjusters. (FIG. 6. 2 a) When the installation position is
determined, cause the adjusters to come into contact with the floor directly, make adjustments in
a manner so that the casters will be raised approximately 5 mm from the floor and make sure
that the machine position is level.
① Transport the product to the
installation position.
② Have all of the Adjusters make
contact with the floor. Adjust
the Adjuster's height by using a
wrench so that the machine
position is kept level.
③ After making adjustment, fasten
the Adjuster Nut upward and
secure the height of Adjuster.
FIG. 6. 2 b ADJUSTER
FIG. 6. 2 a BOTTOM VIEW
CASTER
ADJUSTER
FIG. 6. 2 c
Refer to this Fig. (Scale:1/100)
for the layout of the place of
installation.
FIG. 6. 2 d
Provide ventilation space for the ventilation
opening.
Allow more than 70 cm (approx. 28 in) of
space for customer traffic.
警 警 告 告
注 鞍 注 鞍
警 警 告 告
3500mm
2350mm
150mm