Sega AV F-ZERO AX, Owner'S Manual

Page: 81 / 252

− 74 −
10 −２ SYSTEM TEST MODE
● Any settings that are changed by users during TEST MODE are saved
upon exiting TEST MODE with the EXIT command in the SYSTEM
MENU. If the unit is powered off prior to exiting, changes to settings
will not take effect.
● You may not enter GAME TEST MODE while the unit is reading from
or checking the GD-ROM. If error messages are displayed when
exiting TEST MODE, you should power the unit off and on again.
10 − 2A SYSTEM TEST MENU
SYSTEM TEST MODE is used primarily to check if boards are functioning properly, to adjust
monitor colours and change coin/credit settings.
① Press the TEST Button after powering on the unit to display the following SYSTEM MENU.
SYSTEMMENU
RAMTEST
MEDIABOARDTEST
SYSTEMINFORMATION
JVSTEST
SOUNDTEST
C.R.T.TEST
COINASSIGNMENTS
CLOCKSETTING
NETWORKSETTING
ENTERGAMETEST
[*******************]
→EXIT
SELECTWITHSERVICEBUTTON
ANDPRESSTESTBUTTON
② Press the SERVICE Button to move the cursor to the desired test item.
③ Move the cursor to the desired item and press the TEST Button to display each test screen.
④ Move the cursor to ENTER GAME TEST and press the TEST Button to enter the individual test
menus for each game. Refer to "10-3 GAME TEST MODE".
⑤ When testing is complete, move the cursor to EXIT and press the TEST Button. The game
advertisement screen should be displayed.
The following settings should be set as indicated for this product.
●ＣＯＩＮ ＣＨＵＴＥ ＴＹＰＥ：
ＣＯＭＭＯＮ
●ＳＥＲＶＩＣＥ ＴＹＰＥ： ＣＯＭＭＯＮ
●ＮＥＴＷＯＲＫ ＴＹＰＥ： ＥＴＨＥＲ