Sega AV F-ZERO AX, Owner'S Manual

Page: 55 / 252

− 48 −
８−２ DISASSEMBLING AND MOVING THE MACHINE
● The following operations should be carried out by the store's
maintenance personnel. Serious accidents such as electric shock may
result if the operations are carried out by persons lacking the
necessary technical knowledge,
● When disassembling the machine in order to move it from one
installation location to another, be sure to turn off the power before
beginning the operation. Failure to do so may result in electric shock.
● Operations should be performed exactly as they are described in this
manual. Accidents may occur if the operations are not performed in
the proper manner and order, or if two operations are performed at
once. Such actions may also make it impossible to perform
subsequent operations and result in damaged or deformed parts.
● Follow the procedures outlined in this manual for safe and accurate
installation. Failure to do so may result in accidents during operation.
● If the machine does not fit through the entryway to the installation
location, do not disassemble it without first consulting the instructions.
The machine should only be disassembled in accordance with the
instructions listed in this manual; do not attempt to disassemble it in
any other way. Specific tools and adjustment procedures are required
to assemble and disassemble its mechanical parts. Attempting to
assemble or disassemble the machine without consulting the
instructions may result in accidents during assembly/disassembly and
electric shock, short circuits, and/or personal injury during operation. If
the machine still does not fit through the entryway after following the
procedures listed in this manual, contact your retailer or the office
listed in this manual.
● If the machine is still too large to fit through the entryway after
following the procedures listed in this manual, do not tip the machine
on its side. Attempting to transport the machine while it is tipped on its
side may cause accidents. It may also damage or warp parts of the
machine, resulting in accidents while operating the machine.
● Be sure to have the indicated number of personnel on hand when
performing these operations. Attempting to perform an operation with
fewer people than indicated may result in injury to personnel. It may
also cause secondary accidents such as dropped parts.
● Take care not to damage the wiring. Damaged wiring can cause
electric shock and/or short circuits.
● Leave plenty of space to perform these operations. Working in areas
where the floor space is too narrow or the ceiling is too low will not
only hinder progress, but may also lead to accidents.
● Do not perform these operations on inclined surfaces or surfaces with
steps or troughs. Doing so may result in serious accidents (e.g.
causing the cabinet to tip over.) Operations are also rendered more
difficult by such surfaces.
● Make sure that persons other than the personnel performing the
operations are not allowed to enter the work area.
● When placing removed parts aside, take care not to pinch fingers or
toes.