Sega AV F-ZERO AX, Owner'S Manual

Page: 142 / 252

− 135 −
For the purpose of static prevention, special coating is applied to the CRT
face of this product. To protect the coating, pay attention to the following
points. Damaging the coating film can cause electric shock to the
customers.
15 − 2 CLEANING THE CRT SURFACES
Static preventive coating is applied to the CRT surfaces. When cleaning,
pay attention to the following points. Peeling off of static preventive coat
can cause electric shock.
● Remove smears by using a dry, soft cloth (flannels, etc.). Do not use a
coarse gauze, etc.
● For smear removing solvent, alcohol (ethanol) is recommended.
When using chemical detergent, be sure to follow instructions below:
･ Dilute chemical detergent with water and dip a soft cloth in and then
thoroughly wring it to wipe smears off.
･ Do not use a chemical detergent containing an abradant, powder or
bleaching agent.
･ Do not use alkaline chemical detergents such as "glass cleaner"
available on the market or solvents such as thinner, etc.
● Do not rub or scratch the CRT face with hard items such as brushes,
scrub brush, etc.
Clean the CRT surfaces once a week. When cleaning, pay attention to the above caution so that
the antistatic coating will not come off.
Aluminum Foil
● Do not apply or rub with
a hard item (a rod with
pointed edge, pen, etc.)
to or on the CRT
surfaces.
● Avoid applying stickers,
seals, etc. on the CRT
face.
● Do not remove aluminum
foils from the CRT
corners. Removing the
aluminum foils can cause
static prevention effects
to be lowered.