Sega AV F-ZERO AX, Owner'S Manual

Page: 52 / 252

− 45 −
8. PRECAUTIONS WHEN MOVING THE MACHINE
８−１ MOVING THE MACHINE
● When moving the machine, be sure to pull out the plug from the power
supply. Moving the machine with the plug as is inserted can cause the
power cord to be damaged and could result in a fire and or electric
shock.
● When moving the machine on the floor, retract the Adjusters and
ensure that Casters make contact with the floor. During transportation,
pay careful attention so that Casters do not tread power cords and
earth wires. Damaging the power cords can cause an electric shock
and or short circuit.
● When lifting the cabinet, be sure to hold the grip portions or bottom
part. Lifting the cabinet by holding other portions can damage parts
and installation portions due to the empty weight of the cabinet, and
cause personal injury.
● Do not move the product with a GD-ROM disc inside. Remove the
GD-ROM disc before moving the product.
Failure to observe this instruction may cause the GD-ROM disc and/or
GD-ROM drive to be damaged.
● Do not hold or press the plastic parts as indicated by the Figure 8.1.
Failure to observe this instruction may break the parts, and eventually
the broken pieces may cause a personal injury.
● When transporting the machine by truck or other vehicle, do not attach
ropes to any part of the machine other than those indicated in the
diagram. Doing so may damage machine parts, and the resulting
shards and cracks may cause injury. In addition, use cloth or other soft
material to protect parts that come into contact with ropes.