Sega AV F-ZERO AX, Owner'S Manual

Page: 124 / 252

− 117 −
③ Adjust the switch so that the roller on its actuator terminal touches the pin that interlocks with
the paddle lever when the lever is not being manipulated.
④ Tighten the 2 screws.
⑤ Manipulate the paddle lever to make sure the microswitches are turning on and off properly.
Listen for a clicking sound. Also, make sure that the switch does not adhere to the actuator itself
when turned on.
⑥ Replace the front and rear steering covers. Take care not to pinch the wires or overtighten the
screws.
Note that the screws used to secure the left and right sides of the front steering cover have
different dimensions from the others. Check the dimensions of the screws before installing
them.
⑦ On the Input Test screen, check to make sure that the microswitches turn on and off consistently
when the paddle levers are manipulated (see 10-3B).
② Unplug the wire connectors from the
microswitch and unfasten the harness lug
holding the wires in place.
① Remove the front steering cover and detach the rear steering cover (see 11-1).
HARNESS LUG
CONNECTOR
PHOTO 11. 2 b
③ Remove the 2 screws holding the SW ADJUST plate
in place and then remove the microswitch together
with the SW ADJUST plate.
PHOTO 11. 2 c
REPLACEMENT PROCEDURE