Sega AV F-ZERO AX, Owner'S Manual

Page: 12 / 252

− 5 −
2. PRECAUTIONS REGARDING INSTALLATION LOCATION
This product is an indoor game machine. Do not install it outside. Even
indoors, avoid installing in places mentioned below so as not to cause a
fire, electric shock, injury and or malfunctioning.
● Places subject to rain or water leakage, or places subject to high
humidity in the proximity of an indoor swimming pool and or shower,
etc.
● Places subject to direct sunlight, or places subject to high
temperatures in the proximity of heating units, etc.
● Places filled with inflammable gas or vicinity of highly inflammable/
volatile chemicals or hazardous matter.
● Dusty places.
● Sloped surfaces.
● Places subject to any type of violent impact.
● Vicinity of anti-disaster facilities such as fire exits and fire
extinguishers.
● The operating (ambient) temperature range is from 5℃ to 30℃.
LIMITATIONS OF USAGE REQUIREMENTS
● Be sure to check the Electrical Specifications.
Ensure that this product is compatible with the location's power supply,
voltage and frequency requirements.
A plate describing Electrical Specifications is attached to the product.
Non-compliance with the Electrical Specifications can cause a fire and
electric shock.
● This product requires the Breaker and Earth Mechanisms as part of
the location facilities. Using them in a manner not independent can
cause a fire and electric shock.
● Ensure that the indoor wiring for the power supply is rated at 7 A or
higher (AC single phase 100 〜 120 V area), and 4 A or higher (AC 220
〜 240 V area). Non-compliance with the Electrical Specifications can
cause a fire and electric shock.
● Be sure to independently use the power supply equipped with the
Earth Leakage Breaker. Using a power supply without the Earth
Leakage Breaker can cause an outbreak of fire when earth leakage
occurs.
● Putting many loads on one electrical outlet can cause generation of
heat and a fire resulting from overload.
● When using an extension cord, ensure that the cord is rated at 7 A or
higher (AC 100 〜 120 V area) and 4 A or higher (AC 220 〜 240 V
area). Using a cord rated lower than the specified rating can cause a
fire and electric shock.