FCC STATEMENT
BATTERY INFORMATION
Using a Phillips/crosshead screwdriver (not
included), loosen the screws in the battery
compartment cover (screws stay attached to
cover.) Remove the cover. Insert 3 x 1.5V “AA” or
LR6 size batteries. Alkaline batteries recommend-
ed. Replace cover and tighten screws.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
the device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communication. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Item#
9592
VISIT US AT
THEBRIDGEDIRECT.COM
• Non-rechargeable batteries are not to be charged.
• Rechargeable batteries are only to be charged
under adult supervision.
• Rechargeable batteries are to be removed from
the toy before being charged.
• Different types of batteries or new and used
batteries are not to be mixed.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
BATTERY INSTALLATION
JOUST and all related characers and elements
© & ™ Warner Bros. Entertainment Inc. (s17)
Basic Fun, a Div. of The Bridge Direct, Inc.
Boca Raton, FL 33431, USA
MADE IN CHINA
+
-
+
-
+
-
