DOCS-010 Manual, SeaBotix Inc. Users, 200 Series – 18 Mar 09 - Rev B - Page 41 of 52
Step 15
Reinstall the black nylon screws into each thruster propeller
end cap being careful not to over tighten.
Step 16
Wipe away any excess grease from each thruster.
Reassemble
Reverse steps 1-9 in this procedure as well as steps 1-22 of
4.1.1
“Cleaning LBV”.
4.3 Every 500 hours
After operating the LBV for 500 hours, it is recommended that the seals be replaced
throughout the LBV, including the thrusters. Contact SeaBotix Inc. at 619-450-4000 Ext.
124 or email to:
, or your nearest authorized service center,
information is available on the SeaBotix website
www.seabotix.com
.
4.4 Long Term
There is little need for long term maintenance as long as the LBV is taken care of and the
500 hour maintenance is performed. There may be a need to replace the view port if it is
scratched excessively. Replacement of some fasteners may be required as they may
corrode with time.
