DOCS-010 Manual, SeaBotix Inc. Users, 200 Series – 18 Mar 09 - Rev B - Page 36 of 52
Warning:
When placing the LBV on it‟s side care and attention must
be paid to any cabling exiting the camera chassis. Placing stress on
these cables can damage the cable and or the water tight integrity of
the LBV itself.
Step 5
Remove the four M6 x button head screws securing the
bumper frame to the shell.
TO005 required.
Step 6
Fasteners removed:
1 ea Lead Trim Weight if installed.
2 ea M4 X 20 Button Head Screws
2 ea M4 X 25 Button Head Screws
Step 7
Remove the two M5 x 12 button head screws securing
the crossbar to the bumper frame.
Step 8
Lift off the bumper frame.
Step 9
Turn the LBV over to the opposite side.
Warning:
When placing the LBV on it‟s side care and attention
must be paid to any cabling exiting the camera chassis. Placing
stress on these cables can damage the cable and or the water tight
integrity of the LBV itself.
Step 10
Remove the four M6 x 20 button head screws securing
the bumper frame to the shell.
TO005 Required.
