DOCS-010 Manual, SeaBotix Inc. Users, 200 Series – 18 Mar 09 - Rev B - Page 28 of 52
BL
–
Boot Loader
TMC
–
Thruster Motor Controller
SB
–
Sensor Board
VPS
–
Vehicle Power Supply
2.3.5.3
Hours Run
a. Pressing the 3 key will allow you to view the total number of hours that the
LBV has been powered up.
2.3.5.4
Display Ext. Temp
Pressing the 4 key will display the internal temperature of the LBV where the external
temperature is normally displayed. When you exit the menu the temperature reading
resets to the external temperature.
2.3.6
Options Menu
2.3.6.1
Camera Rotate
a. Pressing the 1 key will allow you to turn camera rotate on and off.
Camera rotate allows the user to select how the camera rotation responds
when the CAMERA button is pushed on the OCU. Turn camera rotate on
when you wish to view the same perspective on each camera as you switch
between the two. Turn camera rotate off when you wish to use the first
camera to look straight ahead and the second to look down.
2.3.6.2
Audio Channel
a. This function is not available on the Fiber Optic Video Systems.
2.3.6.3
Camera Tilt
a. Pressing the 3 key will allow the user to reverse the operation of the camera
tilt keys.
NOTE:
For calibration of the tilt function, the camera rotation must be returned to
normal for the correct operation of the tilt function.
2.3.6.4
Vertical Thruster
a. Pressing the 4 key will allow the user to reverse the operation of the vertical
thruster knob on the Operator Control Unit.
