DOCS-010 Manual, SeaBotix Inc. Users, 200 Series – 18 Mar 09 - Rev B - Page 44 of 52
Motherboard Communications LEDs
(Normally flashing green)
Motherboard 12 VDC & 5 VDC Power
LEDS
(Normally solid red)
Surface Power Supply (SPS) or ICC
From left: Red power LED, 10
amp input breaker, amber LED, main
power switch, input power cable, flash &
Sonar/tracking port, video output
connector (covered), operator control
console port, tether connection.
Operator Control Unit (OCU)
Note the two LEDs above the Auto
Head and Depth Buttons, as well as the
LED above the red power button.
Tether, LBV-End
Note Pins 1, 2 & 3
5.4 Proper Operating Conditions
Please note: Whenever the term „normal‟ is used in the Troubleshooting Guide, it
refers to the proper operating condition of that device or indicator.
After correctly connecting all the LBV components, indications of the normal operating
condition of the LBV system is as follows:
-Upon energizing the SPS main power switch, the SPS red and amber LEDs are
continuously lit and do not flash. The LBV is not energized and the LBV does not output
video.