DOCS-010 Manual, SeaBotix Inc. Users, 200 Series – 18 Mar 09 - Rev B - Page 40 of 52
Step 7
Remove the float.
Step 8
Install the backplane securing screw to prevent damage to
the conduit. Use one each M6 x 16 socket cap screw
removed in step 6 above with one each M6 nyloc nut
removed in step 13 of 4.1.1
Step 9
Remove the four (4) Phillips head screws securing the
forward Kort nozzles to the forward thruster assemblies and
remove the Kort nozzles.
Step 10
Remove the three (3) Phillips head screws securing the
lateral Kort nozzle to the lateral thruster and remove the
Kort nozzle.
Step 11
Remove the black nylon Phillips head screw at the propeller
end of each thruster end cap. Four (4) total.
Step 12
Locate the GLA003 grease syringe in the basic spares kit
(BSK). Push the syringe into the hole exposed from the
removal of the plastic screw.
Step 13
Push the grease into the galley until the expelled grease at
the opposite end of the propeller end cap is clean white
grease.
Step 14
Repeat steps 11, 12 and 13 for each thruster.
