Schweitzer Engineering Laboratories SEL-352-1, Instruction Manual

Page: 228 / 444

S
ETTINGS
W
ORKSHEET
Page 12 of 28
FOR THE
SEL-352-1, -2 R
ELAY
Date ________
Date Code 20010731
Dielectric Monitor Logic Settings
Description Range
Loss of Dielectric Logic OFF, ON, CUSTOM DELOG =
If DELOG = ON
62L2 Leak Timer Pickup Time 0–16383 cycles in 1/4-cycle steps
L2pu =
If DELOG = Custom
62L2 Leak Timer Pickup Time 0–16383 cycles in 1/4-cycle steps L2pu =
Loss of Dielectric Timer 62LT1, 62LT2, and 62LT3
LT1 =
LT2 =
LT3 =
Loss of Dielectric Pending Failure
LODPF =
Loss of Dielectric Breaker Failure
LODBF =
Controlled Close Logic Settings
4
Description Range
Live Line/Bus Voltage 10.0–120.0 V in 0.1-V steps 59L =
Dead Line/Bus Under Voltage 1.0–120.0 V in 0.1-V steps
27D =
Controlled Close Logic OFF, 1, 2, CUSTOM CLSLOG =
If CLSLOG = 1
62CLS Timer Dropout Time 0–16383 cycles in 1/4-cycle steps
CLSdo =
62RCA Timer Pickup Time 0–16383 cycles in 1/4-cycle steps
RCApu =
62RCB Timer Pickup Time 0–16383 cycles in 1/4-cycle steps RCBpu =
62RCC Timer Pickup Time 0–16383 cycles in 1/4-cycle steps RCCpu =
If CLSLOG = 2
62CLS Timer Dropout Time 0–16383 cycles in 1/4-cycle steps CLSdo =
Maximum Slip Freq. for Control
Close
0.005–0.500 Hz in 0.001-Hz steps
25SC =
Maximum Control Close Angle
32
•
25SC to 90
•
(min =1) in 0.1
•
steps
25AC =
Maximum Slip Freq. for Manual
Close
0.005–0.500 Hz in 0.001-Hz steps
25SM =
Maximum Manual Close Angle
32
•
25SM to 90
•
(min =1) in 0.1
•
steps
25AM =
Synchronizing Phase A, B, C SYNCP =
4
Volts are set in secondary quantities.