SBC MT 01, Technical Manual

Page: 37 / 132

MT SBC 01
35 MT SBC 01
5734
5734 !
1
2
2
1
5 6
3
4
5
6
5734
5734 !
1. Remove the bracket and optional card from their package.
2. Secure the optional card on the plastic support of the bracket
with the special screws.
1. Terminal block:
P3 : Monitor Pushbutton 3 contact. *
C3 : Monitor pushbutton 3 common contact*. Main common
contact from bracket (disconnect the wire to the bracket
connector to free all the common contacts).
P4 : Monitor Pushbutton 4 contact. *
C4 : Monitor pushbutton 4 common contact. *
+P5 : Monitor pushbutton 5 contact for Art. 5733 *. LED 5
positive input for Art. 5734.
-C5 : Monitor pushbutton 5 common contact for Art. 5733 *. LED
5 negative input for Art. 5734.
+P6 : Monitor pushbutton 6 contact for Art. 5733 *. LED 6
positive input for Art. 5734.
-C6 : Monitor pushbutton 6 common contact for Art. 5733 *. LED 6
negative input for Art. 5734.
2. Bracket male connector.
3. Female connector Art. 5733 or Art. 5734.
3. Connect the optional card female connector to the male
connector on the bracket.
4. Position the wires between the optional card and the bracket as
shown in the figure.
5. Fix the optional card to the connector on the back of the
monitor with the special screws.
6. Only for optional card Art. 5734: cut and remove monitor
pushbuttons 5 and 6.
7. Only for optional card Art. 5734: fit the transparent Pushbuttons
(included in the article package) in the positions of Pushbuttons
5 and 6 as shown in the figure.
* To use the Pushbutton as a C.NO. contact (24V-100mA max)
remove the wire to the bracket connector and free the
corresponding common contact.
7