SBC MT 01, Technical Manual

Page: 21 / 132

MT SBC 01
19 MT SBC 01
4B-6)SIMPLEBUS TYPE (factory-set for modules Art. 1602 and Art. 4660C combined
with Art. 3362 and Art. 3368).
The value of this parameter is used to indicate to Art. 3070/A the type of porter
module with which it has to interface, with particular reference to password
management for the ACCESS CONTROL function: for modules Art. 3062, the
password codes are stored in the memory of the porter module, whereas for
modules Art. 3262 and 3268 they are stored in the memory of Art. 3070/A.
INITIAL CONDITION
Module powered up LANGUAGE (1-10):
VALUE:_ _ _
4C) SETTING THE LANGUAGE
The value of this parameter is used to set the language in which messages are
displayed.
The first time module Art. 3070/A is switched on, proceed as follows:
*
N.B: The values in
brackets are the min and
max limits of the parameter
(ref. table page 21)
The DEFAULT option sets
the messages to ITALIAN,
and you will be asked to set
the language again, the next
time the module is switched
on.
If entry is successful.
DISPLAY DESCRIPTION OPERATION
LANGUAGE (1-10):
*
VALUE:1 _ _
PARAMETER
CHANGED
Enter the value of the
parameter. EXAMPLE:
you want to set the
language to ENGLISH. To
cancel the operation press
X .
Press to confirm the
value of the parameter.
To change the value of the parameter, if the value is not set to DEFAULT:
INITIAL CONDITION
Configuration mode has
been accessed
(see point 4A). The module is in
programming mode.
The menus are scrolled
through automatically
every 2 seconds.
MAIN
SETTINGS
*
N.B: The values in
brackets are
the min and max limits
of the parameter
(ref. table page 21)
If entry is
successful.
DISPLAY DESCRIPTION OPERATION
ENT. LANGUAGE
VALUE:2_ _
ENT. LANGUAGE *
VALUE:2 _ _
PARAMETER
CHANGED
Select the SETTINGS/
LANGUAGE menu
with the
;
to exit, press X .
Enter the value
of the parameter.
Enter the desired value
for the parameter.
Press
to confirm the value
of the parameter.
5) ACCESS CONTROL
This function serves to activate the door lock release relay in the porter module (contact SE
/ SE ) when a previously saved password code is keyed in (EXECUTION OF A
PASSWORD-ACTIVATED DOOR LOCK RELEASE RELAY).
INITIAL CONDITION
Configuration mode has
been accessed
(see point 4A). The module is in
programming mode.
The menus are scrolled
through automatically
every 2 seconds.
MAIN
SETTINGS
*
N.B: The values in
brackets are
the min and max limits
of the parameter
(ref. table page 21).
If entry is
successful.
SIMPL. TYPE ( 0 -1 ) *
VALUE: _
PARAMETER
CHANGED
Select the
SETTINGS / PORTER
PAR. / SIMPLEBUS TYPE
menu, using the
.
To cancel an operation or
exit the menu, press
X .
Enter the desired value
for the parameter.
Press
to confirm the value of the
parameter.
DISPLAY DESCRIPTION OPERATION
*
N.B: The values in
brackets are
the min and max limits
of the parameter
(ref. table page 21).
If entry is
successful.
If entry does not fall within
the limits.
DISPLAY DESCRIPTION OPERATION
Select the
SETTINGS / PORTER
PAR./ ADDRESS RS485
menu using the
.
To cancel an operation
or exit the menu press
X .
Enter the desired value
for the parameter.
Press
to confirm the value of the
parameter.
ADDRESS RS485 ( 1 -255 ) *
VALUE: _ _ _
PARAMETER
CHANGED
Or:
ENTRY
WRONG
5A) ENTERING A PASSWORD CODE
INITIAL CONDITION
Configuration mode has
been accessed
(see point 4A). The module is in
programming mode.
The menus are scrolled
through automatically
every 2 seconds.
MAIN
SETTINGS
The password code can have
up to a maximum of 6 digits.
If the code typed
is not already in the memory.
It is possible to enter up to
300 password codes.
If the code is already
in the memory.
DISPLAY DESCRIPTION OPERATION
PASSWORDS
VALUE: _ _ _ _ _ _
PASSWORDS
VALUE:_ _ _ 100
STORING
IN PROGRESS
Or:
ALREADY
IN MEMORY
Select the ACCESS
CONTROL /PASSWORD /
ENTER menu, using the
;
to exit the menu press X .
Enter the desired password
code.
EXAMPLE: 100.
Press to confirm the
entry.
5B) DELETING A PASSWORD CODE
INITIAL CONDITION
Configuration mode has
been accessed
(see point 4A). The module is in
programming mode.
The menus are scrolled
through automatically
every 2 seconds.
MAIN
SETTINGS