GROUP S.P.A.
MT SBC 01
8
INITIAL CONDITION
8H) DELETING A NAME BY MEANS OF Art 1230
(not available if call mode is Indirect Code; see point 9)
Select the user name to be
eliminated by scrolling the
list by means of the
▲▼
keys.
Press the NAME key <- on
Art.1230.
Press ENTER on Art.1230
to confirm deletion.
Module powered up
and in standby.
If any users have been
stored in the directory.
SMITH JOHN
DELETE
THE NAME ?
ELIMINATION
IN PROGRESS
DISPLAY
DESCRIPTION
OPERATION
ENTER USER
CODE
Followed by:
SCROLL NAMES
SEARCH NAME
8I) DELETING ALL THE NAMES IN THE DIRECTORY
Configuration mode has
been accessed
(see point 3).
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
Select the NAME
DIRECTORY/ DELETE
ALL NAMES menu
Press the key
to eliminate all the
users in the directory.
Press the key
to cancel the operation.
DELETE
ALL NAMES ?
ELIMINATION
IN PROGRESS
DISPLAY
DESCRIPTION
OPERATION
8L) DISPLAYING THE NUMBER OF NAMES STORED IN THE DIRECTORY,
THE SOFTWARE VERSION INSTALLED AND THE ID CODE
Select the INFO menu.
Configuration mode has
been accessed
(see point 3).
REV. 1.6
NAMES STORED: 0
ADDRESS RS485 255
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
DISPLAY
DESCRIPTION
OPERATION
9) SETTING THE OPERATING MODE
(Standard or indirect code)
9A) STANDARD CALL MODE ( Default )
In this operating mode, the interphone user is identified by a User Name field and by a
Code field.
EXAMPLE: User name
= Smith ;
Code
= 1
The call can be made in the following ways:
1)Select user
Smith
by means of the
▲▼ ➔
keys, then press
➔
to send the call to
the user identified by code 1.
2)Enter the code 1
➔
from the keypad and press
.
9B) INDIRECT CODE CALL MODE
In this operating mode, the interphone user is identified by the fields
Indirect code, User name
(optional) and
Code
.
EXAMPLE: User name
= Smith ;
Code
= 1;
Indirect code
= 100
The call can be made in the following ways:
1) Select the user
Smith
by means of the
▲▼ ➔
keys and press
➔
to send the call
to the user identified with code 1.
2) From the keypad, enter the
Indirect Code
100
➔
, and press
➔
to send the call to
the user identified with code 1.
To select the Standard call mode or indirect code, the following operations must be
carried out:
Select the SETTINGS
MENU /
CALL OPERATING menu
Select the desired mode
using the
▲▼
keys.
Press the key
to confirm the selection.
Configuration mode has
been accessed
(see point 3).
CALL OPERATING
* STANDARD
INDIRECT CODES
CALL OPERATING
* STANDARD
INDIRECT CODES
CALL OPERATING
* STANDARD
* INDIRECT CODES
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
DISPLAY
DESCRIPTION
OPERATION
10) MODIFYING THE SYSTEM PARAMETERS
10A) SETTING THE PARAMETERS OF PORTER MODULE ART. 1602-4660C
(door lock release time, audio timing and reset wait time.
“Reset wait time” means the time lapse between the moment at which one call is closed
and the next can be started).
Press
to select the
SETTINGS /
SYSTEM PARAMETERS/
PORTER PARAMETERS
menu.
Select the parameter to be
modified.
EXAMPLE: audio
timing.
Change the value
of the parameter using the
▲▼
keys, to cancel the
operation, press
.
Confirm the value
by pressing
.
Configuration mode has
been accessed
(see point 3).
Module Art. 1602 / 4660C
powered up with terminal PR
connected to the - terminal.
The module is in
programming mode.
ENT. AUDIO TIMING
ENT. DOOR LOCK TIME
ENT. RESET TIME
ENT. AUDIO TIMING
ENT. DOOR LOCK TIME
ENT. RESET TIME
VALUE IN SECS. 010
PARAMETER
CHANGED
Admissible values
Audio timing: from 10 to 180 sec.
door lock release time: from 1 to
99 sec.
Reset wait time: from 0 to
10 sec.
A confirmation tone
will be heard on porter
module Art. 1602/4660C.
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
DISPLAY
DESCRIPTION
OPERATION
Entry of the list with the listed fields can only be carried out by means of the software
Art.1249/A.
The indirect code can have a maximum of 6 figures.
The User Name field can also be omitted (see Indirect Code
Mode without name
field in the online
Guide Art.1249/A).
To update a module where a list has already been stored, it is first necessary to
completely cancel the one present, following the procedure in paragraph 8L.
