MT SBC 01
51
MT SBC 01
2-wire digital interphone with adjustable-volume electronic ringtone,
conversation privacy, speech button on the base, door lock release
pushbutton, Switchboard Call or free pushbutton (C/N.O), switch
and LED for privacy or doctor service (automatic lock release
following a call).
Complete with 8-position DIP switch for selecting the desired user
code. Allows handling of landing calls. Interphone to be used in
Simplebus 1, Simplebus 2 or Simplebus Color mixed audio/video
systems.
Fitted with branch terminal Art. 1214/2C
.
Dimensions: 85x223x65 mm.
Technical specifications:
1.
Door lock release pushbutton.
2.
Pushbutton 2 (see Table 1 for programmable functions)
/pushbutton for various uses on terminal block (P1 C1).
3.
Pushbutton 3 (see Table 1 for programmable functions).
4.
Privacy/Busy activation indicator LED
5.
Microphone volume control trimmer.
6.
Ringtone volume control trimmer.
7.
System connection terminals.
L L
bus line connection.
CFP CFP
landing call input.
P1 C1
pushbutton normally dedicated to various services.
To have a clean NO contact, cut jumpers CV2 and CV3.
S+ S
- terminals for call repetition device.
L+ L-
terminals for power supply to LED
8.
DIP switch S1 for setting user code.
9.
Jumper CV2
10.
Jumper CV3
11.
DIP switch S2 for setting pushbutton functions (see Table 1).
12.
CV4 and CV5 jumpers to be cut if the LED is powered
separately.
+
-
+
-
MIC
1
2
3
4
5
6
11
9
8
12
7
10
7
Okay wall-mounted interphone with privacy / doctor
function Art. 2410W/2B
Okay wall-mounted interphone for intercommu-
nicating service Art. 2418W
2-wire digital interphone with adjustable-volume electronic ringtone,
conversation privacy, speech button on base, door lock release
pushbutton and Switchboard Call or free pushbutton (C.NO).
Also has 5 additional pushbuttons and a LED for the
intercommunicating function.
To programme the intercommunicating code, use hand-held
programming module Art. 1251/A.
Complete with 8-position DIP switch for selecting the desired user
code. Allows management of landing call.
Interphone to be used in combination with interface Art. 4897,
supplied by transformer Art. 1195, in audio or mixed audio/video
systems (Simplebus 1 and Simplebus 2) when the intercom function
is required. When used in mixed audio/video systems, the
interphone needs terminal art. 1214/2C, to be purchased
separately. Dimensions: 85x223x65 mm.
Description of pushbutton functions
As well as disabling the interphone ringtone like the Privacy
function, the
Doctor
function allows automatic operation of the door
lock release when a call is made to the user code of the interphone
from the external unit. To enable or disable the Doctor function,
press
push button 1
on the interphone for
2 seconds
; selection of
the enabled state is also indicated by the illumination of the indicator
LED. If several users share the same user code, set the Doctor
function on just one of the devices enabled for this function.
The
Actuator Control
or Addressed Actuator function enables you
to use accessories Art. 1256 or 1259C; set these functions only if
the aforementioned accessories are present and correctly set.
To set Art. 1256 or Art. 1259C to be activated in response to
actuator control, see page 53. The Switchboard
Call function
makes it possible to call porter switchboard Art. 1998A in systems
equipped with a switchboard. In systems not equipped with
switchboard Art. 1998A, the same Switchboard Call function can be
used to activate the relay on Art. 1256. To set the actuator relay
module Art. 1256 so that it activates in response to a switchboard
call, see page 52.
The automatic
switch-on function
enables you to communicate
with an external unit without first receiving a call from it. It works
only when the system is free, otherwise the indicator LED flashes.
DIP 4
DIP 3
DIP 2
DIP 1
Pushbutton 2 Pushbutton 3
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
Call
Call
Generic
Generic
Generic
Generic
Call
Privacy
Doctor
Privacy
Doctor
Generic
Table 1
