MT SBC 01
47
MT SBC 01
1.
3-position ringtone/Privacy service selector:
High position: Max. ringtone volume.
Middle position: Medium ringtone volume.
Low position : Privacy function activation
(Privacy service means exclusion of the call ringtone from the
external unit and switchboard; activation of the Privacy function is
signalled by a red indicator appearing at the top right).
2.
Privacy function indicator.
3.
Pushbutton 1 available as standard for Generic Actuator function.
4.
Door lock release pushbutton
5.
Pushbutton 2 available as standard for switchboard call
function.
6.
Pushbutton 3 for various uses present on terminal block (P3 C3).
7.
Optional C.NO. or LED pushbuttons (MAX 3) for additional
functions
(A)
.
8.
Interchangeable cover Fig. 7 page 45.
9.
Pushbutton memo label for indicating the interphone pushbutton
functions (to be applied under the interchangeable cover) Fig. 7
page 45.
10.
Interphone handset (lift the handset to start communication).
(A)
Pushbutton available with optional card Art. 1626.
Display LED available with optional card Art. 1627.
Clean using a cloth moistened with water. Do not use
alcohol or other aggressive products.
“Elegance” interphone equipped as standard with Landing Call (see
variant A on page 123) and Call Repetition (see variant SB2/AAK on
page 122) functions. It is possible to fit up to three interphones with
the same user code in the same system.
To programme the user code, set DIP switch U2 as shown in the
table on page 79. The interphone can be used in either Simplebus1,
Simplebus2 or Simplebus Color systems. The unit is factory-set for
use in Simplebus2 or Simplebus Color systems. Art. 2628 makes it
possible to use the Actuator and Switchboard Call functions in
Simplebus1, Simplebus2 and Simplebus Color systems.
Fitted with branch terminal Art. 1214/2C.
1
3
2
5
4
7
6
9
8
1
3
4
5
6
7
7
8
9
10
2
Description of Style interphone Art. 2628 and user information
11
13
14
11.
System connection terminals.
L L
bus line connection.
CFP CFP
landing call input (see variant A on page 123).
P3 C3
terminals for pushbutton P3 C. NO. 24V 100mA
dedicated to various services.
S+ S-
terminals for call repeater device (see variant SB2/AAK
on page 122).
12. JP1
Jumper for selection of Simplebus1 or Simplebus2 mode.
13.
DIP switch U2 for setting user code (see page 79).
14.
Microphone volume control trimmer.
12
