MT SBC 01
7
MT SBC 01
INITIAL CONDITION
8C) ENTERING BY MEANS OF SOFTWARE ART. 1249/A
Run the software
Art.1249/A. Consult the
online Guide of the
products for the settings
required.
Press the F7 key to start
downloading.
CAUTION:
The call mode selected
must correspond with the
one set on module
Art. 3340 (see point 9).
On completion of
downloading.
Module powered up
and in standby.
Connect the cable
supplied with Art. 1249/A
to terminals TX / RX / -.
Modules 3340 and 3342
must not be in
programming mode.
Or:
DOWNLOAD
FAILED
DOWNLOAD
TERMINATED
If downloading is taking
place correctly.
If there are connection
problems.
The directory must be empty.
DISPLAY
DESCRIPTION
OPERATION
ENTER USER
CODE
7D) MULTIDOWNLOADS
It is possible to create an RS485 system with digital call modules Art.3340/3342 to
upload or download a user name list on any of the modules on this system, using a PC
upgraded with software 1249/A version 2.2 or later.
Each module must have a different ID CODE (see point 10C).
To set up the RS485 network, refer to diagram CA/EN/108 on page 119.
8E) ENTERING DIRECTLY FROM THE KEYPAD
(not available if call mode is Indirect Code; see point 9)
Configuration mode has
been accessed
(see point 3).
Select the
NAME DIRECTORY/
ENTERING NAMES/
MANUALLY menu.
Proceed with entry of
the user name.
EXAMPLE:
SMITH JOHN
Press to
proceed with
entry of the user code.
EXAMPLE: 1
The module is ready for
entering the names.
To cancel the character to
the left of the cursor, press
the
X
key, for special
characters, key 9.
DISPLAY
DESCRIPTION
OPERATION
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
_
SMITH JOHN _
CODE: _ _ 1
Press
to save the user name
and code.
You can now proceed to
enter other users.
STORING
IN PROGRESS
Or:
NAME ALREADY
IN MEMORY
_
If the user name is already in
the directory.
8F) CHANGING A NAME OR A USER CODE
(not available if call mode is Indirect Code; see point 9)
Select the
NAME DIRECTORY/
CHANGE NAMES menu.
Enter the user name to be
modified, with part of the
extension as well.
EXAMPLE: SMIT
Press
to proceed with
searching for the user
name.
ENTER PART
OF THE NAME
REQUIRED
SMIT _
SEARCHING
IN
PROGRESS…
The user name to be
modified is requested.
DISPLAY
DESCRIPTION
OPERATION
Use the
▲▼
keys to scroll
the user name list. Select
the user name to be
modified.
EXAMPLE: SMITH JOHN
Press
to proceed with
modification of the user
name.
Modify the name by means
of the alphanumeric keypad.
Press the key
to
proceed with modification of
the user code.
Modify the code by means
of the alphanumeric keypad.
Press
to store the user
name and code.
It is possible to proceed to
modify another user.
SMITH JOHN
SMITH JOHN _
SMITH JOHN_
CODE: _ _ 1
CODE _ _ 2
STORING
IN PROGRESS
Or:
NAME ALREADY
IN MEMORY
8G) DELETING A NAME
(not available if call mode is Indirect Code; see point 9).
Select the
NAME DIRECTORY /
DELETING NAMES menu.
Enter all or part of the user
name to be deleted.
EXAMPLE: SMIT
Press the key
to
proceed with searching for
the user name.
Use the
▲▼
keys to scroll
the user name list.
Select the user name to be
deleted.
EXAMPLE: SMITH JOHN
Press the key
to
proceed with deleting the
user name.
It is possible to proceed to
delete another user.
DISPLAY
DESCRIPTION
OPERATION
ENTER PART
OF THE NAME
REQUIRED
SMIT _
SEARCHING
IN
PROGRESS…
SMITH JOHN
ELIMINATION
IN PROGRESS
You will be asked to enter
the user name that you want
to delete.
Configuration mode has
been accessed
(see point 3).
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
Configuration mode has
been accessed
(see point 3).
DISPLAY
DESCRIPTION
OPERATION
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
