MT SBC 01
9
MT SBC 01
10B) DISPLAYING THE PARAMETERS OF PORTER MODULE ART. 1602 – 4660C
(door lock release time, audio timing and reset wait time)
Select the SETTINGS
MENU /
SYSTEM PARAMETERS/
PORTER PARAMETERS/
VIEWING.
Configuration mode has
been accessed
(see point 3).
Module Art.1602 / 4660C
powered up with terminal
PR connected to the -
terminal.
DOOR LOCK TIME 01
AUDIO TIMING 010
RESET WAIT TIME 10
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
The display shows
the parameters set
on porter module
Art.1602/4660C.
CAUTION:
The function is only
guaranteed with
porter modules which
have a software version of
2.0 or later.
DISPLAY
DESCRIPTION
OPERATION
10C) SETTING THE ID CODE ( Default = 0 )
The ID code is only used in special applications.
Select the SETTINGS
MENU /
SYSTEM PARAMETERS /
ADDRESS RS485 menu.
Press the key
to confirm
the selection.
Use the
▲▼
keys to
modify the value of the ID
code.
Press the key
to store the value.
Configuration mode has
been accessed
(see point 3).
ADDRESS RS485: 01
ADDRESS RS485: 01
ADDRESS RS485: 254
PARAMETER
CHANGED
The ID code displayed
is not the one configured.
The ID code displayed is not
the one configured.
The code can have a value
from 1 to 255.
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
DISPLAY
DESCRIPTION
OPERATION
11) MANAGEMENT OF THE ACCESS CONTROL FUNCTION
11A) DEFAULT SUPERCODE
The supercode allows access to configuration mode
11B) CHANGING THE SUPERCODE ( Default = 778899 )
Select the
ACCESS CONTROL/
SUPERCODE / ENTER
NEW ONE menu.
Enter the new
supercode. It must
consist of 6 digits.
Press
to confirm the
entry.
Configuration mode has
been accessed
(see point 3).
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
NEW SUPERCODE:
_ _ _ _ _ _
NEW SUPERCODE:
* * * * * *
SUPERCODE
CHANGED
Or:
SUPERCODE
WRONG
DISPLAY
DESCRIPTION
OPERATION
11C) RESETTING THE SUPERCODE
Select the ACCESS
CONTROL/ SUPERCODE /
DELETE menu.
Configuration mode has
been accessed
(see point 3).
SUPERCODE
CHANGED
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
The supercode is restored to
its default value (778899).
DISPLAY
DESCRIPTION
OPERATION
11D) ENTERING A PASSWORD CODE (Default = no code stored)
Configuration mode has
been accessed
(see point 3).
Select the
ACCESS CONTROL/
PASSWORD.
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
DISPLAY
DESCRIPTION
OPERATION
Select the ENTER menu.
Enter the
desired password.
Press
to confirm the
entry.
You can now proceed
to enter other passwords.
ENTER
DELETE
SEARCH
ENTER PASSWORD:
_ _ _ _ _ _
ENTER PASSWORD:
* * * * * *
STORING
IN PROGRESS
ENTER PASSWORD:
_ _ _ _ _ _
Access the door lock release
password management
menu.
The password can have from
1 to 6 characters.
11E) DELETING A PASSWORD CODE
Configuration mode has
been accessed
(see point 3).
Select the
ACCESS CONTROL/
PASSWORD.
Select the
DELETE menu.
Press the key
to
confirm your choice.
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
ENTER
DELETE
SEARCH
ENTER
DELETE
SEARCH
DELETE PASSWORD:
_ _ _ _ _ _
Access the door lock
release password
management menu.
Enter the password value to
be eliminated.
Press the key
to
confirm the entry.
DELETE PASSWORD:
* * * * * *
ELIMINATION
IN PROGRESS
Or:
DELETE PASSWORD:
X X X X X X
If the password was found in
the list.
If the password is not found,
the one with a
similar value is shown.
You can scroll through
the list of passwords
entered, using the
▲▼
keys; to delete the selected
password, press
.
DISPLAY
DESCRIPTION
OPERATION
It is now possible to delete
other passwords.
DELETE PASSWORD:
_ _ _ _ _ _
