MT SBC 01
25
MT SBC 01
5D) ENTERING A LIST ( DOWNLOAD )
Using software Art. 1249/A, it is possible, on module 3072/A, to enter a list with the
User
Name
and
Code
fields, in alphabetical order.
It is necessary to perform the following operations:
5C) MULTIDOWNLOADS
It is possible to create an RS485 system with digital call modules Art.3072/A to upload or
download a user name list on any of the modules on this system, using a PC upgraded
with software 1249/A version 2.2 or later.
In this mode, each module must have a different ID CODE (see point 4A-4). To set up
the RS485 network, refer to diagram CA/EN/109 on page 119.
5B) DELETING A NAME USING ART.1230
DISPLAY
DESCRIPTION
OPERATION
BIANCHINI
TO CALL
DELETE
USER ?
ELIMINATION
IN PROGRESS
followed by
SMITH
TO CALL
SELECT NAME
WITH OR
Select the user name
that you want to delete by
scrolling the list with
the keys.
(EXAMPLE:
BIANCHINI
)
Press the
NAME
key
of Art. 1230.
Press
ENTER
of Art. 1230
to confirm deletion or
ESC
to cancel the operation.
➞
You will be asked to confirm
the deletion.
The name has been deleted.
The display now shows the
next user in alphabetical order.
In software 1249/A it is
necessary to set
CALL
MODE
to Standard.
If download was completed
successfully.
In an error occurred
during download.
DISPLAY
DESCRIPTION
OPERATION
Connect the cable supplied
with software Art. 1249/A to
terminals TX / RX / - ( or D /
D- if you have an RS485
line).
Run the software
Art.1249/A. Consult the
online Guide to the product
for the required settings.
Fill in the list with the User
Name and Code fields in
software Art. 1249/A, or load
an existing list.
Press the Download button
in software Art. 1249/A.
SELECT NAME
WITH OR
SELECT NAME
WITH O
DOWNLOAD
TERMINATED
Or:
DOWNLOAD
FAILED
↑
↓
↑
↓
INITIAL CONDITION
Module powered up
and in standby.
SELECT NAME
WITH OR
↑
↓
INITIAL CONDITION
5E) READING (UPLOAD) OF THE STORED LIST
Using software Art. 1249/A, it is possible, from module 3072/A, to read the list with the
User Name and Code fields. It is necessary to perform the following operations:
Module powered up
and in standby.
SELECT NAME
WITH OR
↑
↓
SELECT NAME
WITH OR
SELECT NAME
WITH OR
UPLOAD
TERMINATED
Or:
UPLOAD
FAILED
↑
↓
↑
↓
If the list was uploaded
successfully.
If an error occurred during
upload of the list.
DISPLAY
DESCRIPTION
OPERATION
Connect the cable supplied
with software Art. 1249/A to
terminals TX / RX / - (or D /
D- if you have an RS485 line.
Ref. wiring diagram
CA/EN/109 on page 119).
Run the software
Art.1249/A. Consult the
online Guide to the product
for the required settings.
Press the Upload button in
software Art. 1249/A.
The list will be uploaded to
software Art. 1249/A.
10 = DEFAULT
0 = Connection by RS232
line
0
180
01
10
POSSIBLE VALUE
DEFAULT VALUE
PARAMETER
1=ITALIAN
2=ENGLISH
3=FRENCH
4=GERMAN
5=PORTUGUESE
6=DANISH
7=FINNISH
8=DUTCH
9=SPANISH
10=DEFAULT
(you will be asked to select
the language the next time
module 3072/A is switched on).
0 = Connection by RS232
line
1 = Connection by RS485
line
Value from 01 to 255
Value from 10 to 180.
Expresses the duration
in seconds of the
interphone conversation.
Value from 01 to 99.
Expresses the duration in
seconds of closure of the
password menu.
Value from 0 to 10.
Expresses the waiting time
in seconds before sending
the reset code at the end
of an interphone
conversation.
LANGUAGE
TYPE OF DOWNLOAD
ADDRESS RS485
AUDIO TIMING
DOOR LOCK RELEASE
TIME
RESET TIME
6) PARAMETERS TABLE
The table below explains the configuration parameters for module Art. 3072/A:
