Savin Aficio SP 4100N, Operating Instructions Manual

Page: 257 / 344

Message Problem and solutions
The print server received error <error number>
during attempt to log in to the network. Access to
the network was denied. Verify that the print server
name and password are correct. Login to the file server failed. The print server is not
registered or a password is specified. Register the
print server without specifying a password.
trap account is unavailable. v3Trap cannot be sent. This could be because the
Trap destination account is different from the
account specified by the printer.
usbd is disable. Plug and Play function and printing is disabled
because usbd is disabled in the security mode.
Enable usbd in the security mode.
WINS name registration: No response to
server<WINS server address> There was no response from the WINS server.
Check the correct WINS server address is entered.
Alternatively, check the WINS server is functioning
properly.
WINS wrong scopeID=<Scope ID> An invalid scope ID was used. Use a valid scope
ID.
wpa authentication Failed WPA authentication failed. Check the WPA
configuration.
wpa authentication started WPA authentication has started.
wpa IEEE802.1X started WPA authentication has started.
wpa connecting to authenticator WPA is connecting to authenticator.
wpa link up WPA key exchange has finished, and
communication has been terminated.
wpa probe response doesn't have IE. WPA probe response does not have IE.
wpa success authenticated WPA authentication was successful.
wpa success key received WPA key reception was successful.
wpa waiting for key Waiting for WPA key.
wpasupd start wpasupd has started.
wpasupd stop wpasupd has ended.
Message List
255
6