Savin Aficio SP 4100N, Operating Instructions Manual

Page: 252 / 344

Message Problem and solutions
Client password rejected The client's password was rejected. Check the client
password.
Client tls certificate rejected The client's TLS certificate was rejected. Check the
certificate.
Connected DHCP Server(<DHCP serveraddress>). The IP address was successfully received from the
DHCP server.
Could not attach to FileServer<error number> (In the remote printer mode) Connection to the file
server has not been established. The file server has
refused the connection. Check the file server
configuration.
Could not attach to PServer<print server> (In the remote printermode) Connection to the print
server has not been established. The print server
has refused the connection. Check the print server
configuration.
Current Interface Speed: xxxMbps Speed of the network (10Mbps, 100 Mbps, or
1Gbps).
Current IP address <currentIP address> Current IPv4 address.
Current IPX address<IPX address> Current IPX address
DHCP lease time expired. DHCP lease time has expired. The printer tries to
discover the DHCP server again. The IP address
until now becomes invalid.
DHCP server not found. The DHCP server was not found. Make sure that the
DHCP is on the network.
dhcpcd start. The DHCPCD service (dhcp client service) has
started.
Duplicate IP=<IP address>(from<MAC address>). The same IP address (IPv4, or IPv6 address) was
used. Each IP address (IPv4, or IPv6 address) must
be unique. Check the address of the device
indicated in [MAC address].
Established SPX Connection with PServer,
(RPSocket=<socketnumber>, connID=<connection
ID>) (In the remote printer mode) Connection to the print
server has been established.
6. Monitoring and Configuring the Printer
250
6