Chapter 5 Configuring
T H E P M 1 3 0 P L U S
Configuring
M E T E R S E C U R I T Y
94
PM130 PLUS Powermeter Series
communications unless you provide a correct password.
If you cannot provide a proper password, contact your local
distributor for the appropriate password to override
password protection.
Using PAS
Ensure that the
On-line
button on the PAS toolbar is checked, select
Administration
from the
Monitor
menu, and then select
Change
Password -> Password 1
.
Figure
5-14: Password Setup Dialog Box
To change the password:
1.
Type in a new 4-digit password
2.
Repeat the password in the
Confirm
new password
box
3.
Check
Enable password protection
to enable password checking
4.
Click
Send
.
