Chapter 5 Configuring
T H E P M 1 3 0 P L U S
Configuring
C O M M U N I C A T I O N P R O T O C O L S
108
PM130 PLUS Powermeter Series
1.
Select
Protocol Setup
from the
Meter Setup
menu and click on the
DNP Class 0 Points
tab.
2.
Select the object and variation type for a point range.
3.
Specify the start point index and the number of points in the range.
Refer to the PM130 DNP3 Reference Guide for available data points.
4.
Repeat these steps for all point ranges you want to be included into
the Class 0 response.
5.
Click
Send
to download your setup to the meter.
The factory-set Class 0 point ranges are shown in the picture below.
Figure
5-22: Protocol Setup Dialog Box – DNP Class 0 Points Tab
