Chapter 5 Configuring
T H E P M 1 3 0 P L U S
Configuring
C O M M U N I C A T I O N S
PM130 PLUS Powermeter Series
71
NOTES
1.
The meter provides the permanent Modbus TCP server on port 502.
2.
Selecting the DNP3 TCP service port launches the second DNP3 TCP
server allowing simultaneous connections on both TCP ports.
Selecting the Modbus TCP port disables the DNP3 TCP server.
The TCP service port can also be changed trough the COM2 serial
port setup. Changing the communication protocol for the port
automatically changes the TCP port for the Ethernet.
3.
When you change the device network settings through the Ethernet
port, the device port restarts so communication will be temporarily
lost. You may need to wait some additional time until PAS restores a
connection with your device.
Setting Up GPRS Network
The PM130 PLUS can provide wireless GPRS communications with the
remote Modbus/TCP server via GPRS modem module. See
in Chapter 2 on how to connect a modem to your
meter.
To set up GPRS communications:
1.
Select
Communications Setup
from the
Meter Setup
menu, and
then click on the
GPRS Setup
tab.
Figure
5-3: Communication Setup Dialog Box – GPRS Setup Tab
