Chapter 3 Using
F R O N T D I S P L A Y
Using
T H E M E N U S
58
PM130 PLUS Powermeter Series
The menu has three entries:
StA: Status Display entry (see the
OPS: Main setup menu entry allowing to review setup options
CHG: Main setup menu entry allowing changing setups, updating the
clock and resetting accumulated values.
To access the Status Display:
1.
If the
StA
window is not highlighted, use the
SELECT
button to
activate it.
2.
Press the
ENTER
button to access the Status Display
To review the meter setup options:
1.
Press the
SELECT
button to activate the OPS window.
2.
Press the
ENTER
button to access the main menu.
To change the meter setup:
1.
Press the
SELECT
button to activate the
CHG
window.
2.
Press the
ENTER
button to access the main menu.
Entering the Password
The Setup Change menu can be secured by a four-digit user password.
You can change the password and enable password protection through the
Access Control menu (see
). The meter is
primarily shipped with the password preset to 0 and password protection
disabled.
If password protection is enabled, you are prompted for a password when
entering the setup change menu.
To enter the password:
1.
Adjust the first digit with the
UP
or
DOWN
arrow buttons.
2.
Press the
SELECT
button to advance to the next digit. As you move
to the next place, the entered digit is saved and then zeroed. If you
missed a digit, you should re-type all preceding digits before you
reach the missed place again.
3.
Adjust the remaining digits in the same manner.
4.
Press
ENTER
to confirm the password.
If the password you entered is correct, you are moved to the Main menu,
otherwise you return back to the primary menu.
