Samsung WEC8500 Operation Manual Download

Page: 653 / 689

ANNEX B. Open Source Announcement (WEC8500/WEC8050)

page 653 of 689

Yoyodyne, Inc., hereby disclaims all copyright intere

st in the library ‘Frob’ (a library for tweaking

knobs) written by James Random Hacker.

Signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice

That’s all there is to it!

libsmi license

This software is copyrighted by Frank Strauss, the Technical University of Braunschweig,

and other parties. The following terms apply to all files associated with the software unless

explicitly disclaimed in individual files.

The authors hereby grant permission to use, copy, modify, distribute, and license this

software and its documentation for any purpose, provided that existing copyright notices

are retained in all copies and that this notice is included verbatim in any distributions. No

written agreement, license, or royalty fee is required for any of the authorized uses.

Modifications to this software may be copyrighted by their authors and need not follow the

licensing terms described here, provided that the new terms are clearly indicated on the

first page of each file where they apply.

IN NO EVENT SHALL THE AUTHORS OR DISTRIBUTORS BE LIABLE TO ANY

PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES ARISING OUT OF THE USE OF THIS SOFTWARE, ITS

DOCUMENTATION, OR ANY DERIVATIVES THEREOF, EVEN IF THE AUTHORS

HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

THE AUTHORS AND DISTRIBUTORS SPECIFICALLY DISCLAIM ANY

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-

INFRINGEMENT. THIS SOFTWARE IS PROVIDED ON AN “AS IS” BASIS, AND

THE AUTHORS AND DISTRIBUTORS HAVE NO OBLIGATION TO PROVIDE

MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.

libxml2 License

Except where otherwise noted in the source code (e.g. the files hash.c, list.c and the trio

files, which are covered by a similar licence but with different Copyright notices) all the

files are:

Summary of Contents for WEC8500


















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WEC8500

Reviews:

Related manuals for WEC8500

Brands by name

Popular brands

Samsung WEC8500, Operation Manual

Search results

Summary of Contents for WEC8500

Reviews:

Related manuals for WEC8500

Brands by name

Popular brands