CHAPTER 10. System Management
© SAMSUNG Electronics Co., Ltd.
page 480 of 689
10.3 System Resource Management
10.3.1 Retrieving System Status
Retrieving with CLI
By using the ‘show system’ command, you can check the status of each system resource
such as CPU load, memory usage, disk usage, Fan RPM level, or system temperature, etc.
show system cpu: Retrieves CPU load. If there are several cores, the CPU load of each
core is displayed.
show system memory: Retrieves memory usage.
show system disk: Retrieves disk usage.
show system fan: Retrieves system fan speed (RPM level range: 0-3)
show system temp: Retrieves system temperature (°C).
The result of system status retrieval using each command is as follows:
[CPU Load]
The retrieving CLI execution result of WEC8500 is as follows:
WEC8500# show system cpu
Average CPU usage (%)
control plane : 3.84
data plane : 0.00
WEC8500# show system cpu detail
-----------------------------------------------------------------
Average CPU usage (%)
control plane 2.12
data plane 0.00
-----------------------------------------------------------------
Detail CPU usage (%)
control plane
[10.00] [04.23] [00.00] [02.74] [00.00] [00.00] [00.00] [00.00]
data plane
[00.00] [00.00] [00.00] [00.00] [00.00] [00.00] [00.00] [00.00]
[00.00] [00.00] [00.00] [00.00] [00.00] [00.00] [00.00] [00.00]
The retrieving CLI execution result of WEC8050 is as follows:
WEC8050# show system cpu
Average CPU usage (%)
control plane : 39.43
data plane : 0.01
WEC8050# show system cpu detail
-----------------------------------------------------------------
Average CPU usage (%)
control plane
21.97
data plane
0.01