CHAPTER 5. WLAN Management
© SAMSUNG Electronics Co., Ltd.
page 235 of 689
5) Specify the service MAC type.
mac-type [MAC_TYPE]
Parameter
Description
MAC_TYPE
- localMac: An AP itself provides data service.
- splitMac: Provides data service through the APC.
6) Select a radio bandwidth to provide the WLAN service.
radio [RADIO]
Parameter
Description
RADIO
- 1: 5 GHz
- 2: 2.4 GHz
- 3: Supports both 5/2.4 GHz
7) Select whether to provide the SSID as hidden. If it is set to ‘hidden’, the SSID is not
found when other devices do searching.
suppress-ssid
8) Select the tunnel mode.
tunnel-mode [TUNNEL_MODE]
Parameter
Description
TUNNEL_MODE
- LocalBridging: Make all the user traffics are bridged at the AP.
- 8023Tunnel: Make all the user traffics are transmitted in the 802.3 format
(Not supported if the MAC type is split mac).
9) Broadcast packets can be forwarded to the WLAN. The default value is disable.
WEC8500/configure/wlan 1# broadcast-enable
10) Multicast packets can be forwarded to the WLAN. The default value is disable.
WEC8500/configure/wlan 1# multicast-enable
11) Configure the 802.11k service for the WLAN. The default value is enable.
voice-enterprise-80211k [enable/disable] [CAPABILITIES]