CHAPTER 8. Security
© SAMSUNG Electronics Co., Ltd.
page 454 of 689
Configuration using Web UI
In the menu bar of
<WEC Main window>
, select
<Configuration>
and then select
<Security>
<AAA>
<External BYOD Server>
in the sub-menus.
Figure 262. External BYOD Server Configuration Window
1) Service
Enable the function of interoperating with the external BYOD server.
2) Server IP Address 1
Enter the IP address of the BYOD server. Enter the Airfront IP upon the interoperation
with AirCuve BYOD Suite.
3) Server IP Address 2
Enter the Byfront IP upon the interoperation with AirCuve BYOD Suite.
4) Requested URL
It is necessary to update the list of all authentications upon the interoperation with
AirCuve BYOD Suite. Basically use the set value and enter a new URL if change is
required.
5) SYNC. Status
Display the result value of updating the list of all authentications.
The status value has one of the following four items:
0: Idle, 1: In progress, 2: Success, 3: Failure
6) SYNC. Failure Reason
If the update of the list of all authentications fails, display the reason of failure.
Failure reason items
None: No failure.
No response: When there is no response from the BYOD server
Invalid data format: When the BYOD server failed to send the data on the list of all
authentications or in the invalid format
