Samsung WEC8500 Operation Manual Download Page 340

Page: 340 / 689

CHAPTER 7. WLAN Additional Services

page 340 of 689

ENABLE : YES
OWN-APC-INDEX : 1
========================================================

[Adding APC to APC List]

To add an APC to the cluster, the APC must be added to the APC list first. APC information

is automatically added to the APC list.

1) Go to apc-list configure mode of CLI.

WEC8500# configure terminal
WEC8500/configure# apc apc-list
WEC8500/configure/apc/apc-list#

2) Add the APC to the APC list.



add-apc [APC_NAME] [MAC_ADDRESS]

Parameter

Description

APC_NAME

APC name to be added to the APC list

MAC_ADDRESS

MAC address of the APC to be added to the APC list
(system mac address output parameter value of the ‘show
system info’ command in the APC)

[Adding APC to cluster]

After adding APC to the APC list, the APC must be added to a cluster.

1) Go to the configure mode of the CLI.

WEC8500# configure terminal
WEC8500/configure#

2) Add the APC to a cluster.



cluster add-apc [INDEX] [APC_NAME] [IPV4_ADDRESS] [DB_REFRESH_

INTERVAL]

Parameter

Description

INDEX

Index in cluster (range: 1-12)

APC_NAME

APC name (maximum 18 characters)

IPV4_ADDRESS

IPv4 address

DB_REFRESH_INTERVAL

Database update interval (Unit: s, range: 60-5000, default: 120)

Summary of Contents for WEC8500


















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WEC8500

Reviews:

Samsung WEC8500, Operation Manual, Page: 340 / 689

Search results

Summary of Contents for WEC8500

Reviews: