Samsung WEC8500 Operation Manual Download

Page: 218 / 689

CHAPTER 4. AP Connection Management

page 218 of 689

[max-download]

This command configures the maximum number of simultaneous downloads when
transmitting the package file of an AP from the APC to the AP.



Max-download [COUNT]

Parameter

Description

COUNT

Maximum number of simultaneous downloads of AP image

file (range: 1-50, default: 10)

[max-retry]

This command configures maximum number of re-attempts when AP upgrade is failed.



Max-retry [COUNT]

Parameter

Description

COUNT

Maximum number of AP upgrade re-attempts

(range: 1-10, default: 3)

[start]

This command provides the entire AP upgrade function.



start [UPGRADE_TYPE]

Parameter

Description

UPGRADE_TYPE

Configures upgrade type (quick-upgrade/predownload)

- quick-upgrade: Perform entire ap upgrade upon an

operator’s request.

- predownload: Download ap image to ap first during entire

ap upgrade.

If you perform package upgrade after configuring AP upgrade type to predownload, restart
all the APs in the following methods.

WEC8500# configure terminal
WEC8500/configure# ap-all
WEC8500/configure/ap-all# reboot upgrade

[stop]

This command provides the function of stopping the image upgrade of all the APs.



stop

[show ap upgrade]

To check the upgrade information of an AP, use the following command.



show ap upgrade summary

Summary of Contents for WEC8500


















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WEC8500

Reviews:

Related manuals for WEC8500

Brands by name

Popular brands

Samsung WEC8500, Operation Manual

Search results

Summary of Contents for WEC8500

Reviews:

Related manuals for WEC8500

Brands by name

Popular brands