CHAPTER 4. AP Connection Management
© SAMSUNG Electronics Co., Ltd.
page 211 of 689
Configure the user information of the AP.
Use r [USER NAME] [AUTHENTICATION TYPE] [AUTHENTICATION KEY]
[PRIVATE PROTOCOL] [PRIVATE KEY]
Parameter
Description
PORT NUMBER
This is the SNMP port number.
COMMUNITY NAME
This is the SNMP Read Only or Write Only Community name.
USER NAME
This is the SNMP user name.
AUTHENTICATION TYPE
This is the SNMP authentication type. Either of the following two
can be selected:
- MD5
- SHA
AUTHENTICATION KEY
A number in the range of 8 to 20 can be entered.
PRIVATE PROTOCOL
Either of the following two can be selected:
- DES
- AES
PRIVATE KEY
A number in the range of 8 to 20 can be entered.
3) Use the ‘show snmp ap’ command to retrieve the agent information configured for the
AP.
Configuration using Web UI
In the menu bar of
<WEC Main Window>
, select
<Administration>
, select
<AP>
in the
submenu, and then select
<v1/v2c Community>
or
<v3 User>
to configure the SNMP
agent information.
Figure 111. AP SNMP v1/v2c Community Configuration Window
Figure 112. AP v3 User Configuration Window
