CHAPTER 3. Data Network Function
© SAMSUNG Electronics Co., Ltd.
page 118 of 689
PRIORITY configuration
The default OSPF Priority value is 1. A user can configure the priority between 1 and
255.
WEC8500/configure/interface ge2# ip ospf priority ?
0 - 255 Priority
WEC8500/configure/interface ge2# ip ospf priority 2
Configuration using Web UI
In the menu bar of
<WEC Main window>
, select
<Configuration>
and then select the
<Controller>
<Network>
<OSPF>
<Interface General>
menu in the sub-
menus.
The configuration page is as follows:
As shown in the below figure, the currently enabled interface items are displayed.
When you select an interface for detail configuration, operator can go to the detail item
configuration page.
The Interface General item is also divided into General configuration and Authentication
window as a tab.
The General configuration screen is as follows: