Samsung WEC8500 Operation Manual Download

Page: 212 / 689

CHAPTER 4. AP Connection Management

page 212 of 689

4.2.5

Information Management

The APC manages the history statistics information, real-time interface statistics

information, and tech support information of the AP.

AP History Statistics

The AP transmits the interface (WAN and WLAN) and CPU load/memory usage statistics

information collected for 5 min. to the APC. The APC forwards the information to the

WEM via FTP. If the APC does not interoperate with the WEM, the APC stores the

information for 3 days.

AP real-time statistics

If the APC requests the interface information to an AP, the AP transmits the interface

information (WAN and WLAN) to the APC at every 5 second and the APC stores the

information in its internal DB. An operator can retrieve the information by using CLI or WEC.

AP Tech Support

If there occurs a problem with a specific AP, an operator can download the Tech Support

information from the AP. Execute the following command to use the function.

The Tech Support from an AP includes the following information.



System log message file



System crash information file



System report files (status/configuration information)



Core file used to check application malfunctioning

4.2.5.1

History Statistics Information

To check the history statistics information relay status of an AP, use the ‘show ap stats-
history’ command.

4.2.5.2

Real-time Interface Statistics Information

Configuration using CLI

1) Go to configure



AP configuration.

WEC8500# configure terminal
WEC8500/configure# ap ap_1
WEC8500/configure/ap ap_1#

2) Configure to make real-time interface statistics information updated periodically.

Summary of Contents for WEC8500


















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WEC8500

Reviews:

Related manuals for WEC8500

Brands by name

Popular brands

Samsung WEC8500, Operation Manual

Search results

Summary of Contents for WEC8500

Reviews:

Related manuals for WEC8500

Brands by name

Popular brands