Samsung WEC8500 Operation Manual Download

Page: 310 / 689

CHAPTER 7. WLAN Additional Services

page 310 of 689

[AirMove Enable/Disable Configuration]

The AirMove is enabled by default, so use the following command to disable it.



no handover mode NCHO

To check the configuration information, use the ‘show handover configuration’ command.

Configuration using Web UI

In the menu bar of

<WEC Main window>

select

<Configuration>

and then select the

<Mobility Management>



<Handover>

menu in the sub-menus.

Figure 174. Handover window

You can enable or disable the intra handover function by selecting Enable/Disable in the

INTER APC HAND-OVER item. After configuring a value, click the

<Apply>

button to apply.

7.2.3

Inter APC Handover Configuration

The Inter APC handover is a technology that supports handover among several APC

systems. Depending on network configuration, the Inter APC L3 handover and Inter APC

L2 handover services are provided.

By using the clustering service, you can configure several APC systems into a single group.

Configures whether to use the Inter APC handover.

The default value of Inter APC handover is not configured.



handover inter-apc enable

To check the configuration information, use the ‘show handover configuration’ command.

Summary of Contents for WEC8500


















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WEC8500

Reviews:

Related manuals for WEC8500

Brands by name

Popular brands

Samsung WEC8500, Operation Manual

Search results

Summary of Contents for WEC8500

Reviews:

Related manuals for WEC8500

Brands by name

Popular brands