Samsung WEC8500 Operation Manual Download

Page: 217 / 689

CHAPTER 4. AP Connection Management

page 217 of 689

Configuration using CLI (Upgrade environment)

To configure AP upgrade related environment, the following command is provided.
First of all, go to the configure



AP-all



upgrade mode of CLI.

WEC8500# configure terminal
WEC8500/configure# ap-all
WEC8500/configure/ap-all# upgrade
WEC8500/configure/ap-all/upgrade#

[select-package]

This command configures a package to use during AP upgrade.



select-package [UPGRADE_TYPE] [FILE_NAME]

Parameter

Description

UPGRADE_TYPE

Configures upgrade type (default/quick-upgrade/predownload)

- default: AP image that is referred to during provision upgrade.

- quick-upgrade: AP image that is referred to for entire AP upgrade

upon an operator’s request.

- predownload: AP image that is referred to download AP image to

AP during entire AP upgrade.

FILE_NAME

Image file name that will be used for AP upgrade

[target]

During entire upgrade, you can select whether to maintain individual configured AP
version of an AP or perform upgrade.



Target [AP UPGRADE TARGET]

Parameter

Description

UPGRADE TARGET

Upgrade target (all/ keeping-individual)

- all: Perform upgrade for all the APs. (default)

- keeping-individual: While maintaining individually configured ap

version, perform upgrade for the rest APs.

[transfer-protocol]

This command selects a transmission protocol that is used to transmit the package file of an

AP from the WEC8500 to the AP.



Transfer-protocol [AP TRANSFER MODE]

Parameter

Description

TRANSFER_MODE

File transmission protocol (ftp/sftp)

- ftp: ftp is used for file transmission.

- sftp: sftp is used for file transmission.

Summary of Contents for WEC8500


















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WEC8500

Reviews:

Related manuals for WEC8500

Brands by name

Popular brands

Samsung WEC8500, Operation Manual

Search results

Summary of Contents for WEC8500

Reviews:

Related manuals for WEC8500

Brands by name

Popular brands