Samsung WEC8500 Operation Manual Download

Page: 183 / 689

CHAPTER 4. AP Connection Management

page 183 of 689



overwrite-link-test



no overwrite-link-test



link-test



no link-test

Parameter

Description

DESCRIPTION

This contains a brief description of the AP group.

OVERWRITE-APC-AP-TIMER If overwrite-apc-ap-timer is enabled, the APC-AP timer setting of

the group is applied to all APs within the group.

ECHO-INTERvAL

Configures the time when an echo request message is

transmitted to the APC where an AP joins (unit: seconds).

DISCOVERY-INTERVAL

Configures a waiting time until the CAPWAP discovery response

message is received (unit: seconds).

REPORT-INTERVAL

Configures the time interval for transmitting the description error

from AP to the APC (unit: seconds).

STATISTICS-TIMER

Configures the time interval for transmitting the statistical

information provided by the CAPWAP (unit: seconds).

RETRANSMIT-INTERVAL

The APC waits for this length of time before retransmitting an

echo request message when there is no response. The APC sets

double the length of echo-interval as the echo timeout time. If no

echo message is received from the AP for as long as double the

length of the echo-interval, the APC judges that the AP is down

(unit: seconds).

MAX-ECHO-RETRANSMIT

The APC waits for this length of time before retransmitting an

echo request message when there is no response. The APC sets

double the length of echo-interval as the echo timeout time. If no

echo message is received from the AP for as long as double the

length of the echo-interval, the APC judges that the AP is down

(unit: seconds).

OVERWRITE-TELNET-SSH

If overwrite-telnet-ssh is enabled, the telnet and SSH settings for

the AP group are applied to all APs within the group.

TELNET-ENABLE

This enables the telnet server and configures telnet port of the

AP.

SSH-ENABLE

This enables the SSH server and configures SSH port of the AP.

OVERWRITE-CONSOLE

If overwrite-console is enabled, the telnet and SSH settings of

the AP group are applied to all APs within the group.

CONSOLE-ENABLE

This configures whether to allow console access to the AP.

OVERWRITE-DTLS

If overwrite-dtls is enabled, the DTLS settings of the AP group

are applied to all APs within the group.

DTLS-POLICY

Configures the DTLS Policy of an AP.

OVERWRITE-LED-CONTROL If overwrite-led-control is enabled, the LED settings of the AP

group are applied to all APs within the group.

Summary of Contents for WEC8500


















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WEC8500

Reviews:

Related manuals for WEC8500

Brands by name

Popular brands

Samsung WEC8500, Operation Manual

Search results

Summary of Contents for WEC8500

Reviews:

Related manuals for WEC8500

Brands by name

Popular brands