Samsung SC32442B54, User Manual

Page: 181 / 647

MEMORY CONTROLLER SC32442B RISC MICROPROCESSOR
5-14
BUS WIDTH & WAIT CONTROL REGISTER (BWSCON) (Continued)
WS2 [10] Determines WAIT status for bank 2.
0 = WAIT disable 1 = WAIT enable 0
DW2 [9:8] Determines data bus width for bank 2.
00 = 8-bit 01 = 16-bit, 10 = 32-bit 11 = reserved 0
ST1 [7] Determines SRAM for using UB/LB for bank 1.
0 = Not using UB/LB (The pins are dedicated nWBE[3:0])
1 = Using UB/LB (The pins are dedicated nBE[3:0]) 0
WS1 [6] Determines WAIT status for bank 1.
0 = WAIT disable, 1 = WAIT enable 0
DW1 [5:4] Determines data bus width for bank 1.
00 = 8-bit 01 = 16-bit, 10 = 32-bit 11 = reserved 0
DW0 [2:1] Indicate data bus width for bank 0 (read only).
01 = 16-bit, 10 = 32-bit
The states are selected by OM[1:0] pins -
Reserved [0] Reserve to 0 0
Note:
1. All types of master clock in this memory controller correspond to the bus clock.
For example, HCLK in SRAM is the same as the bus clock, and SCLK in SDRAM is also the same as the bus
clock. In this chapter (Memory Controller), one clock means one bus clock.
2. nBE[3:0] is the 'AND' signal nWBE[3:0] and nOE.