www.jouleuk.co.uk | www.joule.ie
38
Field Setting Parameters
Accessing And Adjusting The Field Settings
1. To access the field settings push and hold the down arrow and the set key together until the
display shows “10”.
2. Push the Up
arrow once to change 10 to 20.
3. Push the Right
arrow once so the screen shows 20-11.
4. Push the Right
arrow again and the value for 20-11 is shown, use the Up
and Down
arrows to change this value to the desired one.
5. Once the value is changed you must push the Set key otherwise the change is not saved. Push
the Set
to save and a swirling line will appear, this indicated that the unit is saving the change.
6. Push the Left
arrow so that 20-11 flashes, then push the Up
arrow to change to 20-
12, repeat the above process for each parameter that needs to be adjusted.
7. To move up a level in the menu system (Change from 20 codes to 30 codes) push the Left ar-
row until the screen goes back to the inital setting i.e 20. Use the Up arrow to change to 30,
then push the Right
arrow to enter the menu (30-11)
8. Once you have completed adjusting the parameters, push the Esc key to return to the normal
controller screen.
Remember to push Set every time you set a parameter, otherwise it will not be stored
3
System
