www.jouleuk.co.uk | www.joule.ie
58
Care should be taken that there is a minimum distance in front of the unit for service and maintenance
works to be carried out. Enough access to allow maintenance of the valves should be considered. In
addition, the immersion heater is 400mm in length and this distance should be considered to allow-
withdrawal for servicing if required.
When using the adjustable feet, ensure that the floor is strong enough. Install the cylinder unit where
it is not exposed to water/excessive moisture. Particular attention is needed if siting in a garage or
outbuilding as the unit should be protected from frost. All exposed pipework must be insulated. The
unit must be installed upright on a base capable of supporting its weight when full (please see the
technical specification section for weights).
400mm
Suitable Location
7
System
Smart Plumb Compact Installation
