Samsung HHSM-G500005-1 Installation Manual Download Page 15

Page: 15 / 90

Heat Pump Installation Guide

To the maximum extent permitted by law, warranty service does not include repair of failures caused by:

• Modification or attachments

• Accidents or misuse

• Unsuitable physical or operating environment

• Third party products, generic or refilled e.g. maintenance units or replacement parts

• Maintenance by anyone other than Samsung or a Samsung Authorised Service provider

• Operation of a product beyond the limit of its duty cycle or Product specifications

• Products, components, parts, material, software, or interfaces not furnished by Samsung

Neither Samsung nor its third party suppliers or resellers make any other warranty, guaran-

tee, or condition of any kind, whether express, implied, legal or statutory, with respect to the

product(s), and to the extent permitted by applicable law, specifically disclaim any implied,

legal or statutory warranties or conditions or merchantability, fitness for a particular, general

or normal purpose, satisfactory quality, durability and warranties against latent defects.

General Terms Of Promotion

1. These terms and conditions are governed by English law and come under the English courts

shall have exclusive jurisdiction to settle and resolve any dispute which may arise in connection

with the validity, effect, interpretation and/or performance of these terms.

2. By registering for the extended warranty you agree to be bound by these terms and conditions.

3. The Promoter shall have the right, where necessary, to undertake all such action as is reason-

able to protect itself against fraudulent or invalid claim(s) including, without limitation, to require

further verification as to the identity, and other relevant details of an entrant or claimant and/or

the verification as to their qualifying purchase.

4. The Promoter shall not be liable for any interruption to this promotion whether due to force

majeure or other factors beyond the Promoter’s control.

5. The Promoter reserves the right, acting reasonably and in accordance with all relevant legislation

and codes of practice, to vary the terms and conditions of this Promotion.

6. Promoter: Samsung Electronics (UK) Ltd, Samsung House, 1000 Hillswood Drive, Chertsey,

Surrey, KT16 0PS. (Please do not send any Warranty applications to this address - they will not

be registered for Warranty promotion)

Summary of Contents for HHSM-G500005-1



























































































Search results

Summary of Contents for HHSM-G500005-1

Reviews:

Related manuals for HHSM-G500005-1

Brands by name

Popular brands

Samsung HHSM-G500005-1, Installation Manual

Search results

Summary of Contents for HHSM-G500005-1

Reviews:

Related manuals for HHSM-G500005-1

Brands by name

Popular brands