Tel: 886.909 602 109 Email: [email protected]
48
Trigger position
Fig. 3.9 Trigger position in the middle of the screen
Trigger position
Fig. 3.10 Trigger position on the right side of the screen
Through “Trig Delay”, the trigger position can be set at any position on the screen or even outside the screen. Fig. 3.11
shows the signal’s rising edge, with [Trig Pos] set to “Mid”, [Trig Delay] set to “8us” and waveform moved leftwards by
8 us relative to the screen center. Similarly, if [Trig Delay] is set to a negative value, the waveform will be moved
rightwards relative to the screen center.
The waveform displayed on the screen can also be triggered through the last transition of the pulse. Set [Trig Slope] >[-],
and the last transition trigger will be adopted.
