Tel: 886.909 602 109 Email: [email protected]
83
Fig. 4.2 Remote interface
[Error List]
It is used to display the errors during measurement in the form of list. The problem can be determined based on the error
prompt mark.
[Clear Error]
It is used to clear all error information displayed currently.
[Pre Page]
It is used to switch to the previous page to view other error information.
[Next Page]
It is used to switch to the next page to view other error information.
[Save Recall]
It is used to save and recall the current setting state of the power meter.
[Save]
It is used to save the current state of the power meter in an item in the list. Select the state item through the [Up] and
[Down] keys and save the current state in the current item after pressing [Save].
[Recall]
It is used to recall the current setting state of the power meter.
[Default]
It is used to restore the default setting of the power meter upon delivery.
[Clear]
It is used to clear the selected save state.
[Edit]
It is used to edit state name of the current saved item.
[Ins Mode]
