Tel: 886.909 602 109 Email: [email protected]
80
Fig.4.10 Statistic table
[Start Trace]
It is used to display the CCDF measurement result in the form of trace.
[Scale Set]
It is used to set the X scale, vertical scale and decimal digits of the statistic trace.
[X scale]
It is used to set the X scale of the statistic trace. The minimum scale can be 0.1 dB/div and the maximum scale can be 5
dB/div, with 0.1 dB as a step.
[Max Pct]
It is used to set the maximum vertical proportional scale of the statistic trace. Once this software is clicked, the system
will automatically switch among 0.01%, 0.1%, 1%, 10%, and 100%.
[Decades]
It is used to set the density of the vertical scale. The system can switch among 1 - 6.
[Mark Set]
It provides two marks for accurate measurement of the CCDF probability corresponding to the key power level.
[Marker 1]
It is used to set the PRA corresponding to Mark 1. The minimum value is 0dB. The maximum value is related to the
horizontal scale and is the maximum scale displayed by the horizontal line.
[Marker 2]
It is used to set the PRA corresponding to Mark 2. The minimum value is 0dB. The maximum value is related to the
horizontal scale and is the maximum scale displayed by the horizontal line.
[Mk 1 Pos]
It is used to determine the trace to which Mark 1 belongs, which can be Channel A, Channel B, reference line or
Gaussian curve.
