Sagem 6890N User Manual Download Page 34

Page: 34 / 180

1-26

Installation

ALL CONNECTIONS

Caution -

Make sure that the mains On/Off switch of the scanner is set to "O" (Off).

ELEPHONE AND LAN CONNECTIONS

Connect the end of the telephone lead to the telephone wall socket (please see the paragraph

Terminal connections

, on page 1-11), for the connections to the scanner.

Connect the end of the LAN cable (not supplied) to the local network connector that is allocated
to your terminal (please see the paragraph

Terminal connections

, on page 1-11), for the

connections to the scanner.

Note:

The printer and the scanner have separate LAN connections. If you dispose of only one connection, you will need
a concentrator or a switch.

OWER LINE CONNECTION AND SWITCH ON

Caution -

Refer to safety procedures in the chapter

Safety.

Connect the end of the scanner mains lead of the terminal to the mains wall socket.

First set the printer On/Off switch to "

" (

), then set the scanner On/Off switch to "

" (

After a few seconds, when the printer has warmed up, the date and time will appear. To adjust the
language and time of your terminal, please see the paragraph

Setting your machine

, on page 3-1.

Summary of Contents for 6890N





















































































































































































Search results

Summary of Contents for 6890N

Reviews:

Related manuals for 6890N

Brands by name

Popular brands

Sagem 6890N, User Manual

Search results

Summary of Contents for 6890N

Reviews:

Related manuals for 6890N

Brands by name

Popular brands