Sagem 6890N User Manual Download Page 144

Page: 144 / 180

6-16

Maintenance

LEANING

Cleaning the scanner’s reading devices

When one or more vertical lines appear on transmitted copies or faxes, follow these steps:

Cleaning the printer

Clean the outside of the printer by means of a soft cloth dampened with neutral household detergent.

Dust, dirt and paper debris on the outer surfaces and inside the printer can interfere with printer
performance. Clean the printer regularly.

Note:

If the message "Clean Printer Press GO" appears after replacing the toner cartridge. Carry out the printer cleaning
procedures (corona, grille, etc.) described in the paragraph

General Information

, on page 6-2 then press the GO

button. The message will disappear and the printer will be ready to print.

Open the scanner cover by
pushing it backwards until held
vertically in position

Clean the two transparent
scanning windows with a soft,
lint-free cloth, dampened with
alcohol.

Close the scanner cover.

Make a copy to check that the
symptoms have been cleared.

Summary of Contents for 6890N





















































































































































































Search results

Summary of Contents for 6890N

Reviews:

Related manuals for 6890N

Brands by name

Popular brands

Sagem 6890N, User Manual

Search results

Summary of Contents for 6890N

Reviews:

Related manuals for 6890N

Brands by name

Popular brands